Available for: Licensing
A novel method of creating an inter-locked (high bond strength) bioactive coating on metallic substrates for orthopaedic applications.
The Technology and its Advantages
The lack of methodology for producing strongly-bonded bioactive coatings on metallic alloys is an impediment to the development of economical and robust orthopaedic technologies, such as those encountered in hip replacement. Current practice is dependent on generating an expensive plasma-sprayed coating of a bioactive substance on a metallic surface over a significant time span and high temperatures, even after which the bond strength of the coating on the surface is questionable and can shear away quite easily and unexpectedly. Pre-treatment of the metal surface with grit-blasting techniques, in order to reduce shear, can weaken the material by introducing crack nucleation centres. Thus, orthopaedic engineering of implants, such as hydroxyapatite-coated titanium alloys, are not as well-developed as they should be after several decades of research, which is significant drawback in the healthcare of an ageing population. This technology consists of a unique processing method to overcome this short coming, to prepare an inter-locked patterned bioactive coating on metallic alloys. Firstly, a bond coat is electrohydrodynamically patterned, and then the interstices of the pattern are filled with a bioactive substance by electrospraying it. The entire procedure takes less than 10 minutes and at ambient temperatures.
In the healthcare industry, hydroxyapatite has been widely used as a coating material to combine its sound biological properties with the excellent mechanical properties of traditional metallic implant materials. Metallic implants coated in hydroxyapatite have successfully been used in dental and orthopaedic applications due to its well documented promotion of direct bone apposition and osteoconductive properties. With the ageing population worldwide, there is an increasing demand for biomedical implants. In the U.K., there were 43,000 hip replacements carried out in 2003 (UK national audit office report 2003) bringing mobility and relief from pain for patients, and the figure is believed to keep on rising in the future.
The increasing population living for longer in the U.S. is set to rapidly enlarge the hip and knee replacement market. In 2008, the U.S. hip and knee replacement market was valued at $6.7 billion and is forecast to grow by 11.9% to reach $14.8 billion in 2015 (‘US Hip and Knee Implants: Strategic Market Analysis and Insight to 2015’, GlobalData, 2009)
Intellectual Property Status
Patent regional/national stage.
Please contact Dr Mark Gostock, Senior Business Manager | T: +44 (0)20 7679 9000 | E: firstname.lastname@example.org
The technology referred to herein is experimental in nature and UCL Business PLC makes no representations and gives no warranties of any kind, either express or implied, in relation to the technology and, in particular but without limiting the foregoing, UCL Business PLC gives no express or implied warranties of merchantability, satisfactory quality or fitness for a particular purpose.